- This line was added.
- This line was removed.
- Formatting was changed.
The CIP pool consists of workstations in the pool rooms CIP1 and CIP2, in the CIP rooms in the container building, in the mini pool room next to the main entrance and in the foyer. All workstations run Ubuntu 16.04 LTS.
All hosts are in the
.cip.ph.tum.de domain. I.e. the fully qualified domain name for
cip1sandy1.cip.ph.tum.de. Since the hosts use the TUM ADS system for authentication, their "official" names are prepended by "tuphcom-".
cipgate.cip.ph.tum.de is accessible from outside the MWN via SSH on port
The workstation configuration is listed below.
Host CPU Memory =========================================================== cip1sandy1-7 Intel i7 -2600K 3.40GHz (SandyBridge) 16 GB cip1iseven Intel i7 -860 2.80GHz 16 GB cip1pavilion1-6 Intel i3-3220 3.30GHz (IvyBridge) 4 GB cip2ivy Intel i5 -3570 3.40GHz (IvyBridge) 8 GB cip2sandy1-3 Intel i7 -2600K 3.40GHz (SandyBridge) 16 GB cip2iseven1
cip2skylake1-4 Intel i7i5 -8606600 23.80GHz30GHz (Skylake) 16 GB 16 GB
cip2smart Intel i3 -2120 3.30GHz (SandyBridge) 8 GB cont1sandy1-8 Intel i7 -2600K 3.40GHz (SandyBridge) 16 GB cont1think1-6 Intel Core2 Duo 2.93GHz 2 GB cont2quad1-6 Intel Core2 Quad Q9400 2.66GHz 8 GB cont3sandy1-3 Intel i7 -2600K 3.40GHz (SandyBridge) 16 GB cont3smart Intel i7 -2600K 3.40GHz (SandyBridge) 16 GB foyer1-4 Intel Core2 Duo 2.93GHz 4 GB mini1-6 Intel i3-3220 3.30GHz (IvyBridge) 4 GB ----------------------------------------------------------- cipgate Redundantly hosted virtual machine 2 GB
All Most computers in CIP2 have CUDA-enabled GPU cards and the corresponding SDKs.
User profiles are shared between all hosts. Every host has the same set of applications.
The amount of space you can use in your home directory is limited to 3 GB per user (although this can be increased if you can convince us that you do not want to use the space to backup your mp3 collection). If you need more space for temporary storage (e.g. simulation data) please use the local
/scratch directory. You may use as much space as you like. However please keep in mind that files in /scratch are stored on the local workstation, are never backuped and can be lost at any time.
If you want to access another host's scratch, sshfs is very useful:
user@host:/scratch$ mkdir cip1sandy1 user@host:/scratch$ sshfs cip1sandy1:/scratch cip1sandy1 user@cip1sandy1's password: user@host:/scratch$ ls cip1sandy1/ FILES IN THIS DIRECTORY ARE NOT BACKUPED AND CAN BE DELETED AT ANY TIME ga25sux lost+found
you can mount any ssh/scp-accessible directory this way. Please note that the mount point should be on a local drive (i.e. scratch), mounting stuff into an NFS-directory (e.g. your home directory) means asking for trouble.